Quiz: 2024 International Building Code Chapter 16: Structural Design

Free Preview

5 of 77 questions

Free Preview: You're viewing a limited version with 5 questions. to access all chapters, including 77 questions for this chapter, detailed explanations, and progress tracking!

1. Which of the following notations represents the combined effect of horizontal and vertical earthquake-induced forces as defined in Section 12.4 of ASCE 7?

2. According to IBC Chapter 16, what information is required on construction documents for buildings constructed using conventional light-frame construction provisions of Section 2308, regarding wind data?

Design wind pressures for exterior components only.
Basic wind speed, V, and allowable stress design wind speed, V_asd, and wind exposure.
Tornado speed, V_T, and effective plan area, A_e.
Applicable internal pressure coefficients.

3. For areas where the ground snow load, p<sub>g</sub>, exceeds 15 pounds per square foot (psf), which of the following is not required additional information to be provided on construction documents?

Flat-roof snow load, p_f.
Risk category.
Snow load duration.
Winter wind parameter for snow drift, W_2.

4. What is the minimum uniformly distributed live load for lobbies in assembly areas, as specified in Table 1607.1?

60 psf
80 psf
100 psf
150 psf

5. In the design of structural members for continuity, if uniform floor live loads are involved, which condition must be met for applying the minimum loads?

Full dead loads on alternate spans with live loads on adjacent spans.
Full dead loads on all spans in combination with floor live loads on spans selected to produce the greatest load effect.
Reduced dead loads on all spans with full live loads on all spans.
Only full live loads on all spans, disregarding dead loads for load effect determination.

72 More Questions Available

Buy full access to 2024 International Building Code, including 77 questions for this chapter

Quiz: 2024 International Building Code Chapter 16: Structural Design

1. Which of the following notations represents the combined effect of horizontal and vertical earthquake-induced forces as defined in Section 12.4 of ASCE 7?

2. According to IBC Chapter 16, what information is required on construction documents for *buildings* constructed using *conventional light-frame construction* provisions of Section 2308, regarding wind data?

3. For areas where the ground snow load, *p<sub>g</sub>*, exceeds 15 pounds per square foot (psf), which of the following is *not* required additional information to be provided on *construction documents*?

4. What is the minimum uniformly distributed *live load* for lobbies in assembly areas, as specified in Table 1607.1?

5. In the design of structural members for continuity, if uniform floor *live loads* are involved, which condition must be met for applying the minimum loads?

72 More Questions Available

2. According to IBC Chapter 16, what information is required on construction documents for buildings constructed using conventional light-frame construction provisions of Section 2308, regarding wind data?

3. For areas where the ground snow load, p<sub>g</sub>, exceeds 15 pounds per square foot (psf), which of the following is not required additional information to be provided on construction documents?

4. What is the minimum uniformly distributed live load for lobbies in assembly areas, as specified in Table 1607.1?

5. In the design of structural members for continuity, if uniform floor live loads are involved, which condition must be met for applying the minimum loads?